The BJA silentAir series is a natural evolution of the superMod series into the high-end segment.


Precision-Built. Vibration-Free. Remarkably Quiet.

Upgraded Chassis
The original Lenco chassis is replaced with two 4 mm stainless steel plates, precision-cut using water jet technology. This delivers enhanced rigidity and stability.

Isolated Motor System
The motor is mounted on a separate chassis, completely isolated from the main bearing. As a result, motor vibrations (from the mains-powered Lenco motor) are no longer transmitted to the bearing or picked up by the cartridge—ensuring ultra-quiet operation.

Original Lenco Components
Only the motor, main bearing, and idler wheel from the original Lenco turntable are retained—everything else is upgraded for modern performance and sound quality.

High-End Performance, Accessible Price
The BJA silentAir series offers true audiophile-grade performance at a price that’s within reach.


 


BJA silentAir Slim
(Dimensions: L45 x B39,5 cm)

The turntables from the BJA-silentAir series come with two options.

All models in this series are available with or without an interchangeable armboard—the choice is entirely yours. Some audio enthusiasts own multiple tonearms and like to switch between them from time to time. This means that multiple armboards can be ordered... I’ll be happy to assist you with the installation of optional tonearms!

BJA silentAir Slim
BJA silentAir Slim with 4mm palisander top plate and 'Soundeck Special Edition'

The CNC-milled turntables made from birch plywood feature a two-part plinth with a cork isolation layer in between.

All electrical connections are placed on the lower plinth. For safety reasons, the underside of the turntable is equipped with recessed built-in covers for both the motor and the tonearm.


Safe and Service-Friendly Design


The turntable’s design prevents direct access to the mains-powered motor, ensuring safety. However, the recessed covers are easily removable, allowing quick access for servicing and maintenance - no need to fully disassemble the unit. Cable channels are neatly routed through the wood for a clean setup.


Beautiful, Custom Finishes


Each turntable is finished with hard oil (in the color of your choice) or textured paint available in black, white, or various shades of gray.

Exclusive Top Plate Options
Choose from several stunning top plates:

  • A 4 mm hardwood plate, custom-made from a variety of woods such as walnut, palisander, or oak- each showcasing a unique, natural grain pattern.

  • Or a 4 mm acrylic glass top plate, available in many colors.

This ensures every BJA-silentAir turntable is truly one of a kind.


Tonearm Installation


I’m happy to mount your own 9" tonearm or you can opt for my beautifully crafted 9-inch BJA tonearm for seamless integration.


silentAir Slim
BJA-silentAir Slim with BJA 9-inch tonearm

Complete Overhaul Included

When you order a turntable built by me, every used part undergoes a full and thorough refurbishment to ensure the best possible performance.

I also incorporate all the key Lenco Heaven upgrades that significantly enhance your turntable’s operation, including the TJN mod, bearing mod, stabilization ring, and bitumen mod. Additionally, ring wiring, a Schuko power plug, and RCA connectors are integrated seamlessly into the CNC design for maximum reliability and ease of use.


Idler Wheel Replacement & Upgrades

Over time, the idler wheel may show signs of wear, such as drying out or spinning less smoothly. To keep your turntable performing at its best, I offer replacement with premium-quality idler wheels from AudioSilente or Audio Creative for a small additional fee.

Coming Soon: My own ultra-quiet BJA idler wheel—engineered to further reduce noise and elevate your listening experience.


Introducing the Exclusive ‘Stone Edition’

Elevate your listening experience with the extraordinary ‘Stone Edition,’ featuring a meticulously CNC-milled 20 mm granite top plate.

Crafted in collaboration with a master stonemason in Austria, each top plate is precision-cut from 20 mm-thick granite, selected from approximately 50 exquisite granite varieties. This bespoke option is a true statement piece—exceptionally rare, uniquely beautiful, and undeniably elegant.

While it commands a premium, the unmatched durability and stunning aesthetics make the Stone Edition a worthwhile investment for discerning audiophiles seeking something truly special.

silentAir Slim 'Stone Edition'
BJA-silentAir Slim 'Stone Edition', BJA superheavy platter, BJA 9-inch toneamr and 'Soundeck Special Edition'

Introducing the ‘Soundeck Special Edition’

A Unique Collaboration for Superior Sound

With permission from Soundeck HiFi Enhancement in England, I proudly present the ‘Soundeck Special Edition’—a truly unique upgrade designed to elevate your turntable’s performance.

Soundeck specializes in highly damped materials, kits, and components that tackle sound and vibration control challenges. Their solutions are used both in OEM applications and as retrofit kits to reduce noise in existing audio setups and machinery.

The Soundeck Special Edition Includes:

  • Soundeck Black Platter Mat (PM)

  • Soundeck Stainless Steel Damping Puck (DPS)

  • Soundeck Damping Cartridge (DC1)

  • Soundeck Mk2 Minis Damping Feet
    (For these round dampers, I’ve developed special birch plywood feet. The Soundeck Mk2 Minis sit between the turntable and these wooden feet, creating a wood–Soundeck–wood sandwich that, to my ears, lifts the sound and adds a sense of openness - making the turntable truly “fly.”)

For more information about these products, please visit SOUNDECK..


All models from the silentAir series are compatible with the use of an outer platter ring!

silentAir Slim met outer platter ring
BJA silentAir Slim with outer platter ring

Options

  • BJA-silentAir Slim without interchangeable armboard

  • BJA-silentAir Slim with interchangeable armboard

  • 4 mm hardwood top plate

  • 4 mm acrylic glass top plate

  • 4 mm polished stainless steel top plate

  • Stone Edition, with 20 mm CNC-milled granite top plate

  • Soundeck Special Edition

  • 9-inch BJA tonearm, incl. installation

  • Should you not have a suitable Lenco turntable for the necessary components, I can supply one at an additional charge (+€200)


For costs please refer to the PRICE LIST.
For more photos, please visit the GALLERY.